BERGHOF B-PRIMIS ET-PRO Series User Handbook Manual Download Page 51

Page: 51 / 61

USER HANDBOOK 1.0 | B-PRIMIS ET-PRO SERIES

Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com
S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx

8.3. Disposal

The device contains the following components which need to be disposed of separately:

→

Metals

→

Electronic components

→

Battery

The respective national regulations for the disposal of electrical appliances in B2B business apply.

The following options are available for disposal of the device:

Disposal by the manufacturer

Unless otherwise agreed, the devices can be returned for disposal.

Disposal in accordance with regional regulations



Dismantle the device and disassemble it completely into its component parts.



Send the metal parts for metal recycling.



Sort the electronic parts (circuit boards, drives, etc.).



Dispose of electronic scrap in accordance with the national laws and regulations.



Make sure that the battery is completely discharged.



Dispose of batteries at a recognised collection point in accordance with national laws and regula-
tions.

Summary of Contents for B-PRIMIS ET-PRO Series






























































Search results

Summary of Contents for B-PRIMIS ET-PRO Series

Reviews:

Related manuals for B-PRIMIS ET-PRO Series

Brands by name

Popular brands

BERGHOF B-PRIMIS ET-PRO Series, User Handbook Manual

Search results

Summary of Contents for B-PRIMIS ET-PRO Series

Reviews:

Related manuals for B-PRIMIS ET-PRO Series

Brands by name

Popular brands