USER HANDBOOK 1.0 | B-PRIMIS ET-PRO SERIES
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com
S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx
11
1.7. Transport and storage
The device is susceptible to impacts, heavy vibrations, moisture and extreme temperatures.
Transport and storage
Protect the device from heavy mechanical stresses during transport.
Always transport the device in its original packaging.
For storage, refer to the applicable ambient conditions (see “Technical data”).
Protect the device from condensation and moisture.
Devices with (rechargeable) batteries
Lithium metal batteries are a hazardous material. According to the manufacturers, they fall under UN
3091 (contained in the device).
Special provision 188 of the ADR can be applied tor transport.
Operation
If the device has been stored or transported in cold weather or under conditions of large fluctua-
tions in temperature, do not start to operate it until it has acclimatised to room temperature for the
place in which it is used.
Wait at least 12 hours after it has reached room temperature before operating the device.
1.8. Unpacking
Upon receipt of the device, make sure that it is undamaged and complete.
Check the packaging for external damage.
If the packaging is seriously damaged or if damage to the contents is evident: do not proceed fur-
ther with opening the packaging; instead immediately inform the transport company and your
supplier.
Remove the packaging and keep it safe for subsequent transport.
Check the contents for evidence of damage in transport.
Check the contents for completeness against the order documentation and keep all delivery doc-
umentation for future reference. The delivery documentation contains important information
about the device and is part of the product.
If you notice any damage in transport or the contents do not match the order: inform the suppliers
immediately.
