24
Setting Items
Description
Time Lapse
Time lapse means the camera can capture images or
videos at a preset time interval regardless of whether
motions are detected. The default parameter is Off,
which means the timer function is disabled. Changing
this parameter to a non-zero value turns on the Time
Lapse mode, and camera will take photos at the given
time interval.
NOTE: if PIR Trigger is set to Off, then Time
Lapse can’t be set to Off.
PIR Trigger
Choose sensitivity of the PIR sensor.
This parameter defines the sensitivity of the PIR: High,
Normal, Low or Off. The default value is “Normal”. The
higher sensitivity indicates that the camera is more
easily triggered by motion, thereby taking capturing
more pictures or video recordings. It is recommended
to use high sensitivity in a room or environment with
little interference, and to use lower sensitivity for
outdoor or environments with lots of interference (e.g.
wind, smoke, near window, etc). Furthermore, the
sensitivity of the PIR is strongly related to the
temperature. Higher temperature leads to lower
sensitivity.
NOTE: if Time Lapse is set to Off, then
PIR Trigger can’t be set to Off.
PIR Interval
This parameter indicates how long the PIR (Passive
Infrared motion sensor) will be disabled after each
triggering while in the ON mode. During this time, the
PIR of the device will not react to any movements.
The minimum interval is 0 second, meaning the PIR will
work all the time. The maximum interval is 1 hour. This
means the PIR will be disabled for 1 hour after each
triggering. Press LEFT or RIGHT to decrease or
increase the value.
