Mic-Fi User’s Manual
page 23
10.3.4
Help Menu
About USB Microscope: you can check your present version
10.3.5
Video Process Tool Bar
HorizontalMirror
VerticalMirror
Negative
Binary Segmentation
Monochrome display (Red)
Monochrome display (Green)
Monochrome display (Blue)
Calibration
10.4
Calibration on Windows
See chapter 7.3
10.5
Measurement on Windows
Line
The line measurement allows you to measure the linear distance between two points.
Simply left click and drag to the desired length, and click again to finish.
Point to Line
The point to line measurement feature allows measurement of a line 90 degree from a
certain line. Simply create a line to represent the base by clicking once to start, drag,
and then click again to set the endpoint. Branch off from the base line to start
measuring the line that is 90 degree from the base line and a final click to finish the
measurement.
Continuous Line
The continuous line function allows measurement of the distance between multiple
connecting lines. Simply click and drag to form one section of distance, click again to
start another section. Continue until the total desired distance is measured. Double
click to finish.
Polygon
The polygon measurement feature allows measurement of a polygon. Simply click and
drag to form the desired length, and click again to start the next section, double click to
finish the polygon measurement.
Radius of Circle
The radius of circle measurement allows you to measure the circumference, area, and
radius of a circle. Simply click and extend out to the desired radius.
Diameter of Circle
The diameter of a circle measurement allows you to measure the circumference, area,
and radius of a circle. Simply click and extend out to the desired diameter.
Three Point Circle
The three points’ circle measurement allows the measurement of the circumference,
area, and radius of a circle. Simply click on any three points on the circle you wish to
measure.
Three Point Arc
The three point’s arc measurement allows a measurement of an arc. Click on three
consecutive points on an arc to measure.
Three Point Angle
The three points’ angle measurement allows the measurement of an angle. Start at the
pivot point and extend out to start measuring an angle.
Four Points Angle
The four points’ angle measurement allows the measurement of an angle by selecting
four points. Simply select two points from one line segment and another two points
from another line segment to complete the angle measurement.
To obtain the accurate measurement data for each magnification, please calibrate before any measurement function.