Mic-Fi User’s Manual
page 4
3.
Use of the microscope
WARNING : LACK OF IMAGE OR SLOW VIDEO ARE THE RESULT OF A LOW BATTERY. BEFORE THE FIRST USE OF THE
MICROSCOPE, PLEASE MAKE A CHARGE OF AT LEAST 12 HOURS.
Wi-Fi:
Press
for 2 seconds; the microscope will generate a Wi-Fi network
Wi-Fi Indicator
(
Blue LED
): Flashing light indicates data transmission; Constant light indicates no data
transmission.
Power Indicator
(
Green LED
): Lights when power on Wi-Fi or connected to PC or AC adaptor via MiniUSB
cable.
Led
: Press
for 2 seconds to switch from white led to UV led (only for UVW model); press + and – to
increase or decrease the intensity of light
Photo:
Press
to capture the picture directly from microscope
.
3.1
Charging Instructions
1.
Connect the DC Adapter (plug the AC adapter into an AC outlet) or PC’s USB cable, it charges whether the power
switch is on Wi-Fi or OFF/USB.
We DO NOT recommend charging Wi-Fi Microscope while using
2.
Battery led
(
Orange
LED
or
Red LED
):
Red LED
when the battery level is low;
Orange
LED
when the battery is
charging
3.
The charge led
: When the battery is at full charge, the battery LED
comes OFF