background image

5

GENERAL

3  DESCRIPTION OF THE 

APPLIANCE

B

 

IDRA MS FI LE

 solar storage cylinders are designed 

for installation in domestic hot water production systems 

heated by 

B

 solar collectors.

The most important technical features of these solar stor-

age cylinders are:

 - The storage cylinder and coil are specially designed 

and shaped for optimum performance in terms of 

stratification, heat exchange and replenishment times

 - Internal glazing, bacteriologically inert, to ensure the 

maximum hygiene of treated water, reduce limescale 

deposits and make cleaning operations easier

 - CFC-free polyurethane insulation and an elegant ex-

ternal casing reduce heat loss and improve efficiency

 - Temperature sensor and power cables are all inter-

nally routed

 - A flange is provided for easy cleaning and mainte-

nance of the anti-corrosion magnesium anode.

B

 

IDRA MS FI LE

 storage cylinders are equipped with a 

special solar controller and can easily be integrated in so-

lar heating systems in which 

B

 boilers or water heaters 

provide supplementary heat.

4  IDENTIFICATION

B

 

IDRA MS FI LE

 storage cylinders are identified by:

Data plate

This lists the technical specifications and performance 

of the product.

kW

m

2

Matricola

Fabrication

Serial number

Modello

Modele

Model

Superficie serp. inf.

Surface serp. inférieur

Bottom coil heat exch. surf. area

Max pot. assorb. sup.

Puiss. absor. serp. sup.

Power abs. by top coil

Beretta Caldaie

Via Risorgimento, 13

23900 Lecco (LC)

BALLON SOLAIRE

Modele

Model

Fabrication

Code

Année

bar

W

l

W

kW

l/1'

BOLLITORE SOLARE

Modello

Matricola

Codice

Anno

m

2

m

2

T067764IFE

SOLARBOILER

Serial number

Code

Year

Dispersioni secondo EN 12897

Déperditions selon EN 12897

Heat loss according to EN 12897

V-Hz

Alimentazione elettrica

Alimentat. élect.

Power supply

Potenza elettrica assorbita

Puissance élect. absorbée

Electrical consumption

Capacità del bollitore

Capacité ballon

Storage cylinder capacity

Press. esercizio max.

Pression service max.

Maximum working pressure of storage cylinder

Superficie serpentino inferiore

Surface serpentin inférieur

Bottom coil heat exchange surface area

Superficie serpentino superiore

Surface serpentin supérieur

Top coil heat exchange surface area

Massima potenza assorbita sup. [T° Primario 80°C]

Puissance absorbée serpentin sup. [T° Primaire 80°C]

Power absorbed by top coil [T° primary 80°C]

Collegamento di terra obbligatorio - Raccordement a la terre obligatoire

Obligatory ground connection

Beretta Caldaie

Via Risorgimento, 13

23900 Lecco (LC)

Produzione acqua calda sanitaria - serp. sup. [∆T 35°C]

Production eau chaude sanitaire - serp. sup. [∆T 35°C]

Domestic hot water production – top coil [∆T 35°C]

Serial number plate

This specifies the serial number and model.

 

b

If these plates or any other means of clearly iden-

tifying the product are defaced, removed or lost, 

proper installation and servicing may be rendered 

difficult.

Summary of Contents for IDRA MS 150 LE





















Reviews: