12
INSTALLER
10 UNPACKING THE PRODUCT
B
IDRA MS FI LE
storage cylinders are delivered in a
single package, protected by a cardboard box on a wood-
en pallet.
The following items are delivered in a plastic bag inside the
packaging:
- Instruction manual
- Spare parts catalogue
- Hydraulic test certificate.
A
B
H
IDRA MS 150 FI LE
A
880
mm
B
1040
mm
H
1280
mm
11 HANDLING
Make sure that any lifting equipment is of adequate capac-
ity to lift and move the storage cylinder. Remove the brack-
ets (1) to free the storage cylinder.
To lift the storage cylinder, remove the plug (2) and insula-
tion (3) and screw an eyebolt (Ø 10 mm) of suitable capac-
ity for the weight of the cylinder into the hole (4).
1
1
1
2
4
3
If suitable equipment is not on hand to lift the storage cyl-
inder off the pallet using the eyebolt, proceed as follows.
- Place a platform of about half the height of the pallet
near the storage cylinder. Make sure the platform is
able to support the weight of the storage cylinder
- Remove the brackets (1) then carefully rotate and
slide the storage cylinder off the pallet on to the plat-
form
- Make sure that the storage cylinder is perfectly sta-
ble, and then remove the pallet
- Carefully rotate and slide the storage cylinder off the
platform on to the floor
- Remove the platform. Position the storage cylinder as
required.
Adjust the feet to ensure that the storage cylinder is per-
fectly level.
17
b
Wear suitable personal protective equipment and use
suitable safety devices.
a
Do not dispose of packaging material into the envi-
ronment, or leave it within the reach of children, since
it can become a potential hazard. Dispose of packag-
ing material in compliance with applicable legislation.
Installer
Summary of Contents for IDRA MS 150 LE
Page 19: ...19 END USER ...
