EN
.
2
T
HIS INSTRUCTIONS TO BE RETAINED BY THE USER
Thank you for choosing this radio frequency (RF) radiostat.
This central heating control device is easy to fit, and with
correct use, will deliver improved comfort levels in your home
whilst saving you money.
This thermostat is designed to be used only with heating
controls system with a maximum switching load of 2A at
30VDC or 0,25A at 230VAC.
If installing for someone else, please ensure that the
instructions are handed to the householder.
W
ARNING
: Please read this manual prior to installation or use.
S
HOCK
H
AZARD
: This unit must be installed by a competent
person, in accordance with BS 7671 (the IEE Wiring
Regulations), or other relevant national regulations and codes
of good practice. Always isolate the AC Mains supply before
installing this unit.
FIRST INSTALLATION WARNING
.
The product arrives ready to use, the only action required by
the installer is the wiring connections of the receiver to the
boiler. Coupling between receiver and transmitter is already
pre-configured at the factory.
I
MPORTANT
: these instructions should be read in conjunction
with the appliance installation instructions. It is recommended
that this device is installed by a qualified electrician.
E
NCODER KNOB
Encoder
movements:
clockwise
and
anticlockwise rotation.
Encoder clockwise and anticlockwise
rotation: increase or decrease the room
comfort temperature. The selected value
start to blink 5 times; after this blinking period the comfort
temperature value is automatically entered.
Encoder rotation one step: check the selected comfort
temperature. The value will blink for few times and later it will
be back to the room temperature value display.
D
ISPLAY
E
NCODER
S
ENSOR
O
PENING