2 | INSTALLATION
10
2
INSTALLATION
Ensure that the installation and operation sites are properly ventilated
in order to disperse any gas leaks that could cause flames during
activities with intense heat generation and high temperature.
Avoid proximity to sources of ignition in continuous operation (open
flames, gas household appliances, electric stoves, lit cigarettes, etc).
Use equipment suitable for the system refrigerant.
Use an electronic leak finder properly calibrated for the system
refrigerant.
It is forbidden to use leak finders with halogen lamps.
2.1
Receiving the product
BREVA EX
is supplied in a single pack, protected by a cardboard
box and by polystyrene elements.
The following material is placed inside the packaging, below the unit
Document envelope:
- Instruction's book for the installer and for the Technical Service in
Italian
- Instruction's book for the installer and for the Technical Service in
English
- Warranty/Spare parts labels.
- energy label
- etichetta gas refrigerante
It is also supplied as kit:
- 4 x vibration dampers
- Hex wrench
- Condensate discharge connector
- 2 screws
When you get the product, check immediately that the contents are
all present and undamaged. Contact the dealer
if you notice
any problems.
The Instruction book comes with the equipment and it should be
taken, read and kept carefully.
The document envelope must be kept in a safe place. Any duplicate
must be requested from BERETTA which reserves to charge the
cost.
2.2
Labels positioning
A
Package label
B
Transport label
2.3
Dimensions and weight
Model
18000-2
Packaging dimensions
H
mm
625
L
mm
954
P
mm
409
Weight
kg
39
Model
18000-2
Product dimensions
H
mm
553
L
mm
800
L1
mm
860
P
mm
275
Weight
kg
36
