27
27
ENGLISH
To install
CONNECT LE
inside the box, proceed as follows:
- Insert the right side of the
CONNECT LE
inside the box and
rotate the left side until the
CONNECT LE
enters completely
making sure that the insulator covering the mixing bottle is not
damaged
- Insert the hook (2) of the mixing bottle and attach to the hook (3)
on the back of the box
- Position the system delivery and return pipes into the seats po-
sitioned on the rack (4) making sure that the nuts (5) are posi-
tioned below the rack itself
-
4
5
2 3
Remove the protective plug (1) on the mixing bottle
- Fit the pipes (6) and (7) on the couplings (6a) and (7a), locat-
ed on the mixing bottle and positioning the designated seals
supplied
6a
7a
1
9
8
4
6
7
- Place the bracket (8) together with the electrical connection box
(9), on the rack (4) and secure it with the designated screws
supplied.
6
6a
7
7a
1
9
8
4
b
The hydraulic module is supplied already wired to the drivers
of the module itself. For other connections, please refer to the
wiring diagrams in this document (see
“1.9 Wiring diagram” a
pagina 23).
