7
ASSEMBLY
Apply grease on the rotation ring (item 1).
Install the chute assembly (item 2) with four retaining
plates (item 3) as shown.
On the rear left hand corner, secure a retaining plate
(item 3) on top and the motor assembly support (item
4) underneath with two 1/4 x 3/4" bolts (item 5) and
flange nuts as shown.
Secure the other three retaining plates (item 3) with
six 1/4 x 1/2" bolts (item 6) and flange nuts.
Tighten the bolts firmly.
Install chute
Insert bushings on rotation worm
Grease the end of the rotation worm of the motor
assembly (item 1).
Insert the bushing (item 2) on the end of the rotation
worm as shown.
Insert the motor assembly in the sleeve (item 3).
Install the motor assembly
