16
ASSEMBLY
Adjust the idler pulley (item 2) as follows:
After installing the belts, you may run the engine
without the belt guard but only for the time needed to
verify the belt alignment. Do not leave the
snowblower without supervision.
Neither you or
anyone must approach the moving parts.
Engage and disengage the snowblower to make sure
that the belts are well aligned, especially on the idler
pulley.
If necessary, you can add or remove a flat washer for
final adjustment on the idler pulley (item 2).
Install the belt guard (item 2) and secure in place with
the rubber latch (item 1).
Install belt guard
STEP 6
FINAL ADJUSTMENTS
DANGER
Never let the snowblower motor run without the
belt guard & belt guide stopper in place.
WARNING
TO PREVENT INJURIES:
Start the engine, engage and disengage the
clutch to be sure if functions normally.
Make sure the emergency switch is working
perfectly. Make sure all the controls are working
well.
Figure 1
Back view of snowblower
AXIS
AXIS
AXIS
