18
ASSEMBLY
Lower the arm (item 1) to release the tension on the
helper spring (item 2) to facilitate rotary broom
installation.
Attach the rotary broom to the subframe as shown.
Make sure the rotary broom is pushed in until locked
into place by the springs (item 3).
Before installing the belt, unhook the spring (item 2)
by sliding the spring link (item 4) off the tension arm
(item 1).
Put the spring on the ground on the left side.
Release tension on the helper spring
Attach broom to subframe / Remove the helper spring
ROTARY BROOM INSTALLATION:
Refer to rotary broom owner’s manual, parts
breakdown section for parts identification.
WARNING
TO PREVENT INJURIES:
Stop the motor.
Apply parking brakes.
Remove the ignition key.
Disconnect the wire from the spark plug(s) and
keep away from spark plug(s) to prevent accidental
starting.
WARNING
FOR YOUR SECURITY:
Read the rotary broom owner's manual for safety
precautions and rules.
Follow the assembly and operation instructions.
CAUTION
TO PREVENT INJURIES:
Always raise the attachment to reduce the
tension on the spring before applying or
releasing tension on the helper spring. Firmly
hold the handle when you release the tension
because the arm will kick back due to the tension
on the spring.