9
ASSEMBLY
Install the drive mechanism under the tractor by
hooking the slotted part on the tractor’s lift
mechanism crossbar (item 1).
Attach the front end to the rear support (item 2) with
two pins (item 3), the heads towards the inside.
Secure with a 2.5 mm. hair pin (item 4) on each side.
To make it easier to install the belt on the motor
pulley, remove the belt from the drive mechanism
pulley. Insert it around the motor pulley and put it
back on the drive mechanism pulley.
Install the clutch rod to the tractor’s manual clutch
lever mechanism the same way it was installed on the
mower.
Secure with a 2.5 mm hair pin.
NOTE:
Check to make sure the drive mechanism
works well.
If the attachments do not stop rapidly when the
drive mechanism is disengaged, readjust the
clutch rod.
Check to be sure the belt does not touch the belt
guides at any time when the P.T.O. clutch is
engaged.
Install drive mechanism
