ASSEMBLY
VERIFY BELT ROUTING:
-Lower the rotary broom to the ground and let it run for
a few seconds under supervision.
-Disengage the rotary broom and stop the engine.
-Check the belt to make sure it is well inserted in the
pulleys and that it has not flipped on its side on the
pulleys and that it does not touch the belt guides.
-Reinstall the belt guard.
VERIFY TIRE PRESSURE:
Attachments should raise 3" to 4" above the ground
(no more, no less) if not, check and adjust tractor tire
pressure as follows:
Front tires:
20-25 psi
Back tires:
8-10 psi
Tire pressure must be even on both sides of the
tractor.
22