ASSEMBLY
Install the snowblower to the subframe as shown.
Make sure the snowblower is pushed in until locked
into place by the springs (item 1).
Insert the handle (item 1) into the support (item 2) as
shown.
Install the hook (item 3) on the rotation worm (item 4).
Insert the hook in the handle (item 1) and secure with
a 2.5 mm hair pin (item 5).
17
STEP 2
SNOWBLOWER INSTALLATION:
Refer to snowblower owner’s manual, parts
breakdown section for parts identification.
9
WARNING
9
FOR YOUR SECURITY:
Read the snowblower owner's manual for safety
precautions and rules.
Follow the assembly and operation instructions.
9
WARNING
9
TO PREVENT INJURIES:
Stop the motor.
Apply parking brakes.
Remove the ignition key.
Disconnect the wire from the spark plug(s) and
keep away from spark plug(s) to prevent accidental
starting.
Install the double pulley support as shown on the
male hitch by using two 5/16 x 1" bolts (item 1) and
flange nuts. Tighten the bolts firmly.
9
CAUTION
9
TO PREVENT INJURIES:
Always raise the attachment to reduce the
tension on the spring before applying or
releasing tension on the helper spring. Firmly
hold the handle when you release the tension
because the arm will kick back due to the tension
on the spring.
Install pulley support
Install the snowblower
Install handle