ASSEMBLY
19
VERIFY BELT ROUTING:
-Lower the snowblower to the ground and let it run for
a few seconds under supervision.
-Disengage the snowblower and stop the engine.
-Check the belt to make sure it is well inserted in the
pulleys and that it has not flipped on its side in the
pulleys and that it does not touch the belt guides.
-Reinstall the belt guard.
VERIFY SKID SHOE ADJUSTMENT:
LEVEL PAVED SURFACE: Adjust skid shoes to allow
3/16 to 1/4" clearance (A) between cutting edge and
surface.
UNEVEN OR GRAVEL SURFACE: Adjust skid shoes
to allow 1/2 to 5/8" clearance (A) between cutting edge
and surface.
VERIFY TIRE PRESSURE:
Attachments should raise 3" to 4" above ground (no
more, no less) if not check and adjust tractor tire
pressure as follows:
Front tires:
20-25 psi
Back tires:
8-10 psi
Tire pressure must be even on both sides of the
tractor.
Adjust skid shoes