27
Cleaning
6005735_0 – 31.03.2021
EN
5.
Cleaning
5.1
Safety instructions for cleaning
D
WARNING!
Hazard through a disregard of the cleaning instructions!
This chapter contains important information for the safe
cleaning of the device.
☞
Read through this chapter carefully before cleaning the
device.
☞
Follow the safety instructions.
y
Cleaning only by authorised users.
D
“1.2 Authorised target groups” (page 4).
y
No cleaning permitted by children under 8 years old and
persons who would not be able to properly assess the
hazards associated with handling the device.
y
After use, the hob and other parts that could be touched
may still be hot. There is a risk of burning.
y
Grease residues should be removed. Grease residues pose
a fire hazard.
The device should be cleaned regularly:
y
Control panel, surface and lower section each time after
cooking.
y
The separating unit with daily use after no more than
8 - 10 weeks at the latest.
5.2
Cleaning procedures
The device draws in dirt particles (e.g. grease and oil particles)
with the air from the room. The dirt particles are separated off
and collected in the lower section and separating unit.
Before every cleaning:
☞
Turn off the device.
☞
Make sure that the hob and other parts that could be
touched have cooled down.
D
ATTENTION!
Danger of damage through improper cleaning!
Sharp-edged objects, abrasive or unsuitable cleaning agents
can damage the device.
The following cleaning agents are unsuitable and must not
be used:
y
Acetone
y
Trichloroethylene
y
Solutions on a cellulose basis (e.g. cellulose thinner)
y
Artificial resin thinner
y
Abrasive media
y
Polishes containing silicone
y
Polishes containing oil
y
Wax
y
Water vapour
y
On painted surfaces: Microfibre cloth
☞
Keep objects that could scratch the device far away from
it (e.g. rings).
☞
Use mild household cleaner (e.g. alkali-free, pH-neutral
multipurpose cleaner).
☞
Use a soft, damp cloth.
☞
Clean without exercising excessive pressure.
The instructions and information on the cleaning agent
should be observed.
Control panel
☞
Clean the control panel with a lint-free, slightly damp
cloth (e.g. a microfibre cloth).
☞
Dry the control panel with a lint-free, soft cloth.
Surfaces
☞
Clean the surfaces with a soft, damp cloth and a mild
household cleaner.
☞
Dry the surfaces with a soft cloth.
Summary of Contents for BIH 100 GL
Page 36: ...6005735_0 31 03 2021 ...
