Beper VE.100A, Use Instructions

Page: 10 / 32

Stand Fan Use instructions
10
PRECAUTlONS
Read the following instructions carefully, since they give you useful safety information about instal-
lation, use and maintenance and help you avoid mishaps and possible accidents.
Remove the packing and make sure that the appliance is intact, with special attention to the supply
cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the
children, in order to preserve them from danger sources. It is recommended not to throw these
packing material in the domestic waste, but to deliver them to the appropriate station of collection
or destruction refusals, asking eventually information to the manager of the Sanitation Department
of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds to the data specified
on the label.
The appliance can be damaged if the voltage is not correct.
If the plug does not suit the socket, let it be replaced with another suitable plug by qualified person-
nel only, which shall also ensure that the section of the socket cables is suitable for your appliance
power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be
necessary, please use only simple or multiple adaptors and extensions in compliance with the safety
rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the
extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
Do not use the appliance if the cable or the plug shows any damages.
Do not use the appliance after a possible irregular working. In this case, switch it off and do not bre-
ak it open. Refer to an authorized Beper after-sale service for repair and require original spare parts
only. Failing to follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is to be considered as
improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving
from improper, wrong or incautious use. This appliance is for HOUSEHOLD USE ONLY.
To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water
or other fluids.
Do not use the appliance near explosives, highly flammable materials, gases or burning flames.
Do not allow children, disabled people or every people without experience or technical ability to
use the appliance if they are not properly watched over. Close supervision is necessary when any
appliance used by or near children.
Do not hold the appliance with wet hands or feet.
Never use any accessories but those provided for by Beper. The use of accessory attachments not
recommended by the appliance manufacturer may cause hazard or injury.
Do not use the appliance near the bath, the shower, the wash-basin or anywhere water can turn out
to be a source of danger.
Do not pull the mains cable or the appliance itself when disconnecting the plug from the socket.
Do not let cord hang over edge of table, or touch hot surface.
Do not expose the appliance to atmospheric agents such as rain, wind, snow, hail. Do not use
outdoors.
Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.