Beper BC.353, Use Instructions

Page: 12 / 60

Deep fryer Use instructions
12
Use tips
Often change oil or fat. Never add new oil or fat to used oil/fat.
Life of oil or fat depends on the food that is fried. Breading, for instance, causes the oil to get dirty quicker than
simple frying. Oil deteriorates if heated several times; it is thus advisable to change oil often.
Make sure not to keep oil or fat in the fryer tank for long time.
Often clean the fryer with blotting paper.
Cleaning and maintenance
Before cleaning, unplug the fryer and wait until the oil/fat has completely cooled down to avoid risk of burning.
Remove the control panel and empty out the oil/fat. Remove oil residue from the tank using a sponge or blotting
paper. Clean the control panel and the electric resistance with a damp cloth.
Wash the basket, the removable tank and the lid with warm water and dish soap.
Thoroughly dry all components.
Never use abrasive sponges, to avoid damaging the fryer.
Never immerse the fryer in water and do not rinse it under tap water.
The product is equipped with a removable filter, it is suggested to replace it periodically in order to maintain the
performances of the product unaltered.
Technical data
Power: 2000W
Power supply: 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that
old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream.
Old appliances must be collected separately in order to optimize the recovery and recycling of the materials
they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin”
symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be
separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to
material and production defects. The purchase receipt and the guarantee certificate must be submitted together in
case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the
date of purchase and the model of the appliance
For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s
efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will auto-
matically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we
guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as
lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatso-
ever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, care-
lessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of
the product, Beper reserves the right to replace only the very part in question and not the entire product
Contact your distributor in your country or after sales department beper.
E-mail assistenza@beper.com which will forward your enquiries to your distributor.