BeoCord VX 7000, User Manual

Page: 8 / 33

> Starting out…
8
Switch on the video tape recorder
Call up the main menu
Press to light up Fine tuning in red
Press to call up the small Fine tuning
menu
Key in the program number you
wish to fine tune,
for example 10
Wait for the program to appear on
the screen, then...
Press to move on to Fine
Press to fine tune the TV program to
your liking
Press to store your fine tuning
Fine tuning the VX 7000
In most cases, the TV stations you have
tuned in to and preset on program
numbers in your BeoVision TV will be
transferred automatically to your
BeoCord VX 7000 as well*.
But, as there is a tuner in both the TV
and in the video tape recorder, slight
differences may occur in the sound and
picture produced by the TV and the
video tape recorder.
You may find, for example, that the
Hi-Fi sound of certain TV programs
recorded from the video tape recorder’s
own tuner is not as good as it should be.
The reason may be that these particular
programs need fine tuning.
1
0
V TAPE
MENU
then
To fine tune a program in the video tape
recorder you must call up the video tape
recorder’s main menu and select the
item Fine tuning. The small fine tuning
menu then appears on the screen:
Key in the number of the TV program
you wish to fine tune. When the
program appears on the screen, press
tt
to move the red text to the figure
below Fine. Press
▲
or
▼
until the
picture is clear and stable. Then press
GO to store your fine tuning instruction.
Alternatively, press EXIT if you do not
want to store your fine tuning.
Note: High quality recordings also depend on the
quality of the video tape used.
* Note: In a few instances – depending on the
type of BeoVision TV you have – you may have
to tune the BeoCord VX 7000 in to all the TV
stations in your area manually. Fine tuning of
the video tape recorder will then be carried out
simultaneously. See pages 30-31 for further
information.
Pg Fine
10 +2
GO
then
tt
or
GO