benza CR 350, Use And Maintenance Manual

Page: 68 / 100

20
16. SUMMARY OF SAFETY WARNINGS
Each and every of the following warnings is intended to prevent the operator of the machine from suffering
any accident. For your safety, carefully read both these warnings and the rest of the Manual.
Thoroughly read the Instructions Manual before assembling and using the machine.
The operator of this machine shall comply with the local health and safety legislation in the workplace in
force.
Lock the transport vehicle before loading or unloading the machine.
In the event that any decal, warning sign or specification plate should come off or were damaged,
immediately order a replacement.
A failure to comply with the instructions in this manual or any alteration to this machine shall exempt the
manufacturer from any liability whatsoever.
The servicing and repair of the machine shall be conducted by qualified personnel only.
DO NOT START THE MACHINE UNLESS EVERY PART AND PROTECTION IS CORRECTLY INSTALLED
AND FIXED.
Only use original spare parts only.
Adjustment, maintenance and cleaning operations must be done with the machine stopped.
USING DISCS WITH A DIAMETER IN EXCESS OF 350 mm.
IS STRICTLY PROHIBITED.
USING DISCS WITH AN INNER DIAMETER OTHER THAN 25.4 mm.
IS STRICTLY PROHIBITED.
Do not operate the machine under poor lighting conditions.
Using the machine in areas where there is risk of fire or explosion is strictly prohibited.