1
Your TM100 is a leading instrument for measuring
temperature and kiln atmosphere in ceramic
applications. The TM100 is a state of the art device
using the latest power saving micro controller
technology allowing highest accuracy combined with
the benefit of mains independent operation.
The basic model of
TM100
is designed for
temperature measuring by a thermocouple. The
TM100-x2
allows connecting a 2nd thermocouple as
well as various kind of sensors (pressure, humidity
etc.). Further to displaying the primary value the
TM100 allows checking maximum values, gradient
etc. (very helpful on manually operated gas kilns). For
measuring the atmosphere of a kiln using circone
oxide probes use
TM100-o2
(reads lambda, O2, CO
etc.).
Before operating the TM100 please read this booklet
carefully to become familiar with the various features
and options of your new instrument.
Only connect the proper type of thermocouple to the
TM100 to avoid damage of kiln and load due to
wrong temperature indication. When receiving TM100
and sensor as a package it is configured properly.
Never put your TM100 on top of a kiln
Carefully insert the thermocouple plug into the socket
(1).
TM100-x2 and TM100-o2 only:
Connect the
second sensor resp. the oxygen plug to the signal
input B (2). Ensure proper orientation / polarity (wide
and narrow side of the plug). Plug design does not
allow wrong polarization except when exessive force
is applied.
Press key (8) to turn on TM100. To turn off your
TM100 press and hold key (8) for four seconds until
display confirms “off”.
When no key is pressed for 1 hour and temperature is
below 150°C the TM100 turns off automatically to
save battery power.
Introduction
Setup
Safety Notes
on
on
off
off
(8)
hold
on
on
off
off
(8)
