manualshive.com logo in svg

Bentone BF 1 KSV RME, Installation And Maintenance Instruction, Page: 3 / 44

Share
Download
Bentone BF 1 KSV RME Installation And Maintenance Instruction Download Page 3

3

 

Bentone 

 

Table of contents

1. Safety  Information ____________________________________ 4

2. Technical  data _______________________________________ 8

2.1  Model BF 1 KS/KSV 76-24 _________________________ 9
2.2  Recommended nozzles and pressures ______________ 10
2.3 Description ______________________________________ 11

3. Installation _________________________________________ 13

3.1  Delivery checks __________________________________ 13
3.2  Preparations for installation ________________________ 13
3.3  Oil supply _______________________________________ 13
3.4  Electrical connection ______________________________ 13
3.5  Choice of nozzle _________________________________ 13
3.6  Brake plate and airflow setting _____________________ 13
3.7  Burner installation ________________________________ 14

4. Basic  settings ______________________________________ 15

4.1  Example of basic setting __________________________ 15

5. Burner  servicing ____________________________________ 18

5.1 Warning ________________________________________ 18

6. Pump  Instructions ___________________________________ 27

6.1  Suntec ANV47C _________________________________ 27

7. Preheater ___________________________________________ 31

8. Oil Burner Control ___________________________________ 32

8.1  Wiring diagram   _________________________________ 32
8.2  Function LMO14/24 ______________________________ 33
8.3  Colour codes LMO14/24 __________________________ 34
8.4  Fault codes LMO14/24 ___________________________ 34

9. Fault  Location ______________________________________ 35

9.1  Burner will not start _______________________________ 35
9.2  Burner will not start after normal use ________________ 35
9.3  Delayed ignition __________________________________ 36
9.4  Noise in pump ___________________________________ 36
9.5  Pump pressure __________________________________ 37

10.  Log of flue gas analysis ____________________________ 38

11.  Oil burners maintenance instructions  _______________ 39

Summary of Contents for BF 1 KSV RME













































Reviews:

No comments