l
All hazardous location installations
must
be performed by a suitably qualified person.
l
RF antenna installations and replacements must be completed by an authorized, qualified
person.
WARNING
HAZARDOUS ENVIRONMENT
Risk of explosive atmosphere
.
Avoid electrostatic potential, especially on plastic
components. Adapters, isolation valves, or sealing rings that
are not compatible with process gasses will corrode and fail.
This failure may result in gas leaks, fire, explosion, or
projectiles.
De-energize all devices before placement or removal. To
prevent corrosion and failure, verify that all components are
compatible. Verify that hazardous materials, atmospheres, and
conditions have been removed or that relevant risk mitigation
measures have been implemented.
The connectors to the equipment cannot be connected or disconnected when energized.
Ranger Pro Gateway Mounting
Mounting accessories allow for limited adjustments for either pole or surface mounted
installations. For ease of installation, the gateway with attached mounting flanges can be
mounted after the main bracket has been installed. Remember to provide enough clearance
around the main bracket to allow for the gateway to be attached and cables connected.
Pole Mounting
Mount Ranger Pro Gateways to either a vertical or horizontal pole using the supplied mounting
accessories. The mounting main bracket is attached to the pole using the supplied mounting
support bracket and the two M8x120 fasteners and washers as shown in the following figure.
14/46
Ranger Pro ISA100 Wireless Gateway
User Guide
158M1430 Rev. -
