Outdoor Mounting
When installing outdoors, the gateway should be mounted upright, and the supplied connector
guard must be installed to protect against UV exposure as shown in Figure 4.
Figure 3 - 3: Connector guard installed for protection against UV exposure
Ground Connection
Ranger Pro Gateways must be grounded using a suitably gauged grounding wire connected to
the grounding lug attachment point on the enclosure.
Surge Protection
The following information is intended only as guidelines and does not replace the need for surge
protection assessment and installation by a suitably qualified person. General guidelines for
surge arrester selection and application principles are given in standards such as:
l
IEC 61643-12:
Low-voltage surge protective devices - Part 12: Surge protective devices
connected to low-voltage power systems - Selection and application principles.
l
IEC 61643-22:
Low-Voltage Surge Protective Devices - Part 22: Surge Protective Devices
Connected To Telecommunications And Signalling Networks - Selection And Application
Principles.
Refer to your site-specific requirements for selection and installation of surge arresters.
16/46
Ranger Pro ISA100 Wireless Gateway
User Guide
158M1430 Rev. -
