Bentel Security FireClass 100, User Manual

Page: 21 / 32

MODIFYING
The
Modifying
option from the
MAIN
menu allows the user to disable the
Devices connected to the control panel, and clear the Verify counters and
logger and modify some of the parameters of the Telecom Module.
Select the
Modifying
option from the
MAIN
menu (press 2).
Enter the User Code (the default code is
11111) each digit will be masked by the
symbol
Q
.
Press the
↵
key to confirm the code. If the
code is valid the display will show the
MO-
DIFYING
menu.
Select the required option and read the relevant paragraph or press ESC
to step back to the
MAIN
menu.
Wrong Code
If a wrong code is entered, the display will
request
Retry
as shown opposite.
User default
Code
The User default code is
11111
. The User default code may be changed
by means of the
PassWD
option from the
PROGRAMMING
menu.
FIRE CLASS 1ØØ
1= Programming
2= Modifying
3= Reading Parameter
Enter
user
code
*****
Modifying:
1=Disable
2=Del.Ver.3=Del. Log
4=Telecom Module
User code
Wrong !
Retry
XXXXX
MODIFYING
21