manualshive.com logo in svg

BENSON OUH 2 100, Installation And Operating Manual, Page: 3 / 44

Share
Download
BENSON OUH 2 100 Installation And Operating Manual Download Page 3

Document Index.

1    Installation requirements.
      1.1    Compliance notices.
      1

.2    Certifi cates of conformity.

      1.3    General product information.
      1.4    General requirements.
      1.5    Delivery and pre-installation checks.
      1.6    Warranty.
      1.7    Health and Safety.
      1.8    Location / Positioning.
      1.9    Fuel supply.
 

1.9.1   Fuel.

 

1.9.2   Storage tanks.

 

1.9.3   Single pipe system (gravity fed).

 

1.9.4   Two pipe system.

 

1.9.5   Pressurised ring main system.

 

1.9.6   Pipework and fi ttings.

      1.10  Electrical supply - general.
      1.11  Air supply 

 

1.11.1 Heaters installed within the heated space.

 

             1.11.1.1 Natural ventilation openings to the    

 

 

heated space

 

             1.11.1.2 Mecanical ventilation openings to the  

 

 

heated space

 

1.11.2. Heaters Installed within a plant room or 

 

 

enclosure.

 

              1.11.2.1 Natural ventilation openings to plant  

 

 

rooms 

 

              1.11.2.2 Natural ventilation openings to

 

 

enclosures  

 

              1.11.2.3 Mech ventilation  to a plant room or   

 

 

enclosure.

      1.12  Air distribution system.
      1.13  Flue system.
      1.14  Dimensions.
      1.15  Technical details.
 

1.15.1   Reference information

2   Installation Instructions
      2.1    Packaging/siting 
      2.2    Heater mounting
      2.3    Minimum clearances
      2.4    Warm air circulation
      2.5    Flue installation
      2.6    Oil installation/connection 
      2.7    Electrical installation/connection 
      2.8    Heater control installation
 

Wiring diagrams

3   Commissioning instructions
      3.1    Commissioning - pretest 
      3.2    Commissioning - ignition 

      3.3    Commissioning - air delivery system.
      3.4    Commissioning - hand over 

4   Servicing instructions
      4.1    Planned servicing.
      4.2    Servicing procedure - Major component parts
 

4.2.1   Flue

 

4.2.2   Axial fan

 

4.2.3   Heat exchanger

 

4.2.4   Electrical supply 

 

4.2.5   Oil supply 

 

4.2.6   Burner 

 

4.2.7 Air delivery system

 

4.2.8 Report

      4.3   Service re-commissioning 

5   Spare Parts

6   Fault Finding Guide

7   Replacing Parts
      7.1    Burner
      7.2    Controller
      7.3    Electrode assembly
      7.4    Nozzle
      7.5    Photocell
      7.6    Oil pump
      7.7    Contactor 
      7.8    MCB
      7.9    Fan/Limit stat assembly
      7.10  Axial fan

8   User and Operating Instructions
      8.1    Commissioning and hand over 
      8.2    Servicing 
      8.3    Start up procedure
      8.4    Stop procedure
      8.5    Shut down procedure 
      8.6    Ventilation only 
      8.7    Lockout situations

Summary of Contents for OUH 2 100













































Reviews:

No comments