![background image](http://html1.mh-extra.com/html/benq/xl-series/xl-series_user-manual_2734376014.webp)
14
How to assemble your monitor hardware
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
2. Connect the power cable to the monitor.
Plug one end of the power cord into the socket
labelled
on the rear of the monitor. Do not
connect the other end to a power outlet just yet.
3. Connect to the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
4. Connect the PC video cable
Available input and output jacks may vary depending on the purchased model. For models with
G-SYNC module, refer to
Modes and the required input source on page 40
for the available
input source and the related menus.
Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is
if they are connected to two different PCs with appropriate video systems.
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end
without the ferrite filter) to the monitor video
socket. Connect the other end of the cable (at the
end with the ferrite filter) to the computer video
socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
-5
-5
O
O
~ +20
~ +20
O
-5
O
~ +20
O
Either
Downloaded from ManualMonitor.com Manuals