![background image](http://html.mh-extra.com/html/benq/w1600ust/w1600ust_user-manual_2735048013.webp)
Introduction
13
Controlling your smart device with the remote control
When the projector projects the content from your MHL compatible smart device, you
can use the remote control to control your smart device.
To enter the MHL mode, press and hold
AUTO
for 3 seconds. The following buttons are
available for controlling your smart device:
Arrow keys (
/ Up,
/
Down,
Left, Right)
,
MENU/EXIT, MODE/ENTER
, #0-#9,
MHL control buttons
.
To leave the MHL mode, press and hold
AUTO
for 3 seconds.
When the projector is under MHL mode, the keypad on the projector should be with the same definition of
the keys on the remote control.
Remote control effective range
The remote control must be held at an angle within 30 degrees perpendicular to the
projector's IR remote control sensor(s) to function correctly. The distance between the
remote control and the sensor(s) should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor(s) on
the projector that might obstruct the infra-red beam.
• Operating the projector from the front
Ap
pro
x.
+3
0º
Summary of Contents for W1600UST
Page 1: ...Projector User Manual ...