background image

Operation

36

If you use this projector under other extreme conditions excluding the above, it may 

display auto shut-down symptoms, which is designed to protect your projector from over-

heating. In cases like this, you should switch to High Altitude mode to solve these 

symptoms. However, this is not to state that this projector can operate under any and all 

harsh or extreme conditions.

Adjusting the sound

The sound adjustments made as below will have an effect on the projector speaker(s). Be 

sure you have made a correct connection to the projector audio input. See 

"Connection" 

on page 19

 for how the audio input is connected.

Muting the sound

To temporarily turn off the sound:
1.

Press 

MENU/EXIT

 and then press  /  until the 

SYSTEM SETUP: Advanced

 

menu is highlighted.

2.

Press  

to 

highlight 

Audio Settings

 and press 

MODE/ENTER

. The 

Audio 

Settings

 page displays.

3.

Highlight 

Mute

 and press  /  to select 

On

.

If available, you can also press 

MUTE

 on the remote control to toggle projector audio between on and off.

Adjusting the sound level

To adjust the sound level, press 

/

/

VOL

+/

VOL

-, or:

1.

Repeat steps 1-2 above.

2.

Press  

to 

highlight 

Volume

 and press  /  to select a desired sound level.

Turning off the 

Power On/Off Ring Tone

To turn off the ring tone:
1.

Repeat steps 1-2 above.

2.

Press  

to 

highlight 

Power On/Off Ring Tone

 and press  /  to select 

Off

.

The only way to change 

Power On/Off Ring Tone

 is setting On or Off here. Setting the sound mute or 

changing the sound level will not affect the 

Power On/Off Ring Tone

.

Using the test pattern

The projector is able to display the grid test 

pattern. It helps you adjust the image size and 

focus and check that the projected image is free 

from distortion.

To display the test pattern, open the OSD menu 

and go to the 

SYSTEM SETUP: Advanced

 > 

Test Pattern

 and press  /  to select 

On

.

Summary of Contents for W1600UST





























































Reviews: