![background image](http://html.mh-extra.com/html/benq/w1000/w1000_user-manual_2735027038.webp)
Operation
38
English
Selecting a Film Mode
Highlight
Film Mode
in the
PICTURE: Advanced
menu and select by pressing
/
on
the projector or remote control.
On
is the default and recommended selection for this projector. When
Off
is selected, the
Film Mode
function is not available.
This function is only available when Video or S-Video with NTSC system is selected.
Selecting a 3D Comb Filter
Highlight
3D Comb Filter
in the
PICTURE: Advanced
menu and select by pressing
/
on the projector or remote control.
3D Comb Filer separates the Y and C signals while simultaneously processing three
consecutive horizontal scan lines. While comparing three consecutive horizontal scan lines
within a single video frame, it also analyzes each frame in advance, ensuring the best
possible picture.
On
is the default and recommended selection for this projector. When
Off
is selected, the
3D Comb Filter
function is not available.
This function is only available when Video or S-Video with NTSC system is selected.
Hiding the image
In order to draw the audience's full attention to
the presenter, you can use
BLANK
on the
projector or remote control to hide the screen
image. Press any key on the projector or remote
control to restore the image.
The word '
BLANK
'
appears at the lower right corner of the screen
while the image is hidden.
You can set the blank time in the
SYSTEM
SETUP: Basic > Blank Timer
menu
to let the
projector return the image automatically after a
period of time when there is no action taken on
the blank screen.
No matter
Blank Timer
is activated or disabled, you can press any key except
ENTER
on
the remote control, or
ENTER
on the projector to restore the picture.
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.
Setting the Sleep Timer
You can set the Sleep Timer interval so the projector powers off after the specified time
period of inactivity (regardless of signal).
Set the sleep timer in the
SYSTEM SETUP: Basic > Sleep Timer
from among Disable/
30 min/1 hr/2 hr/3 hr/4 hr/8 hr/ 12hr.