![background image](http://html.mh-extra.com/html/benq/w1000/w1000_user-manual_2735027046.webp)
Operation
46
English
Description of each menu
FUNCTION
DESCRIPTION
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
"Selecting a
picture mode" on page 33
for details.
Reference
Mode
Selects a picture mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See
"Setting the User 1/User 2/User 3 mode" on
page 33
for details.
Brightness
Adjusts the brightness of the image. See
"Adjusting Brightness" on
page 34
for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See
"Adjusting Contrast" on page 34
for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See
"Adjusting Color" on page 34
for details.
This function is only available when Video or S-Video with NTSC
system is selected.
Tint
Adjusts the red and green color tones of the image. See
"Adjusting
Tint" on page 34
for details.
This function is only available when Video or S-Video with NTSC
system is selected.
Sharpness
Adjusts the image to make it look sharper or softer. See
"Adjusting
Sharpness" on page 34
for details.
This function is only available when Video or S-Video with NTSC
system is selected.
Flesh Tone
See
"Adjusting Flesh Tone" on page 34
for details.
Save Settings
Saves the settings made for
User 1
or
User 2
or
User 3
mode.
Reset Picture
Settings
Resets the picture settings for
User 1
or
User 2
or
User 3
mode.
1. PICTUR
E: Basic
menu