Operation
51
Description of each menu
•
The default values listed in this manual, especially on pages
51-59
, are for
reference only. They may vary between the projectors due to the continuous
improvement to the products.
FUNCTION
DESCRIPTION
Wall Color
Correction
Corrects the projected picture’s color when the projection
surface is not white. See
"Using Wall Color Correction" on page
37
for details.
Projector
Position
The projector can be installed on a ceiling or behind a screen, or
with one or more mirrors. See
"Choosing a location" on page 15
for details.
Test Patternn
Selecting
On
enables the function and the projector displays the
grid test pattern. It helps you adjust the image size and focus and
check that the projected image is free from distortion.
Auto Source
See
"Switching input signal" on page 33
for details.
Menu Type
Selects a
Basic
or
Advanced
menu type.
HDMI Format
Selects an appropriate HDMI format automatically or manually.
Reset Lamp
Timer
See
"Resetting the lamp timer" on page 66
for details.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Rename User
Mode, Language, Projector Position, Source Rename,
Test Pattern, High Altitude Mode, Password and Key
Lock.
Information
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the
Picture
menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Lamp Usage Time
Displays the number of hours the lamp has been used.
3D Format
Shows the current 3D mode.
Firmware Version
Shows firmware version.
Basic men
u
(wit
hout
signal)
