Introduction
14
Infra-Red (IR) remote control sensor is located on the front of the projector. The
remote control must be held at an angle within 30 degrees perpendicular to the
projector's IR remote control sensor to function correctly. The distance straight line
between the remote control and the sensor should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor
on the projector that might obstruct the infra-red beam.
18. SOURCE
Displays the source selection bar.
19. Volume ( / )
Adjusts the sound level.
20. BRIGHT
Displays the brightness setting bar.
21. MODE
Selects an available picture setup mode.
22. FINE TUNE
Displays Color Temperature Fine
Tuning setting bar.
23. COLOR TEMP
Displays the color temperature setting
bar.
24. SHARP
Displays the sharpness setting bar.
25. COLOR MANAGE
Displays the color management setting
bar.
•
Operating the projector from the
front
Approx. 3
0°