background image

Parts of the display and their functions

18

Using the remote control

Installing remote control batteries

Remote control usage tips

• To power on/off the display, aim the top front of the remote control directly at the 

display’s remote control sensor window when you press the buttons.

• Avoid getting the remote control wet or store it in humid environments (like 

bathrooms).

• If the display’s remote control sensor window is exposed to direct sunlight or strong 

light, the remote control may not operate properly. In this situation, change the light 

source, readjust the angle of the display, or operate the remote control from a location 

closer to display’s remote control sensor window.

1. Open the remote control battery compart-

ment cover.

2. Insert the supplied batteries ensuring that 

the positive and negative marked battery 

terminals match the (+) and (-) marks in the 

battery compartment.

The supplied batteries are provided for your 
convenience so that you can operate the display 
straight away. You should replace them as soon as 
possible.

3. Refit the battery compartment cover.

Summary of Contents for RM6502S















































































Reviews: