BenQ RM6502S User Manual Download Page 11

Page: 11 / 78

Setting up the display

Mounting the display

You can install the display on a vertical surface with a suitable wall mounting bracket or

on a horizontal surface with the optional desktop stands. Please pay attention to the

following notes during installation:
• This display should be installed by at least two adult persons. Attempting to install this

display by only one person may result in danger and injuries.

• Refer the installation to qualified technicians. Improper installation may cause the

display to fall or malfunction.

Installing the display on a wall

1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface.

Make sure that the size of the cloth is larger than the display.

2. Gently lay the display on the cloth with the LCD screen facing down.
3. Remove the desktop stands from the display if installed.
4. Identify the wall mounting screw holes on the back of the display as shown in the

illustration.

:$//028176&5(:7+5($'
'(37+0/

RM6502S

*Screw type: M8*25L

:$//028176&5(:7+5($'
'(37+0/

RM7502S

*Screw type: M8*25L

:$//028176&5(:7+5($'
'(37+0/

RM8602S

*Screw type: M8*25L

Summary of Contents for RM6502S















































































Search results

Summary of Contents for RM6502S

Reviews:

Related manuals for RM6502S

Brands by name

Popular brands

BenQ RM6502S, User Manual

Search results

Summary of Contents for RM6502S

Reviews:

Related manuals for RM6502S

Brands by name

Popular brands