![background image](http://html.mh-extra.com/html/benq/ph460/ph460_installation-handbook_2733783058.webp)
58
Digital Signage BH28x/38x
Digital Signage BH28x/38x
The bar type display panel is a long structured design panel. Designed with a slim form factor,
the display panel can be used in small or large spaces to display everyday information.
Installation notice
• The default EDID of BH280/BH380 is 1920x358/1920x545. When the display is connected to
the PCs or laptop, it is at its native resolution.
• Set the display to the projector mode. The picture will be displayed with full screen.
• If the aspect ratio of the picture is the same as that of the display, the picture can be fully
shown without distortion.
Adjusting the OSD setting
The resolution can be adjusted to 1920x1080. You can make the following display effects by
adjusting the OSD setting.
Position
Description
Top
The window is positioned to the top 1/3 of the screen.
Bottom
The window is positioned to the bottom 1/3 of the screen.
Middle
The window is positioned to the middle 1/3 of the screen.
Zoom Out
The full screen is compressed into the window.
Zoom In
• When the window is positioned to the top 1/3 of the screen,
the input image zooms in 3%.
• When the image is on the top and does not fill the screen, you
can choose this position to present the best effect.
• If the input source is not1920x1080, only Zoom Out can be selected.
• Frequency
: Frequency narrows or widens the screen.