Installing a hard disk
40
4. Secure the bracket with 2 silver screws provided.
5. Slide the hard disk with bracket into the hard disk bay at the
back of your nScreen.
6. Push the hard disk rightward to the edge of the hard disk bay.
7. Secure the hard disk with 1 black screw provided.
8. Replace the back cover as instructed in Step 6 and 7 in
"Replacing the memory" on page 36
.
To secure the screw, a small Phillips head screwdriver is
required.
It is recommended that you go into BIOS to load setup
defaults after installing the hard disk. For details, refer to
"Using BIOS setup" on page 25
.
