background image

Maintenance

46

Lamp information

Getting to know the lamp hour

When the projector is in operation, the duration (in hours) of lamp usage is automatically 

calculated by the built-in timer. 

Total (equivalent) lamp hour = 2.5 x (hours used in 

Normal

 mode) + 1.67 x (hours used 

in 

Economic

 mode) + 1.54 x (hours used in 

SmartEco

 mode) + 1.00 x (hours used in 

LampSave

 mode).

To obtain the lamp hour information:
1.

Press 

MENU/EXIT

 and then press  /  to highlight the 

SYSTEM SETUP: 

Advanced

 menu.

2.

Press  

to 

highlight 

Lamp Settings

 and press 

MODE/ENTER

. The 

Lamp 

Settings

 page appears.

3.

Select 

Lamp Timer

 to display lamp usage information.

4.

To leave the menu, press 

MENU/EXIT

.

You can also get the lamp hour information on the 

INFORMATION

 menu.

Extending lamp life

The projection lamp is a consumable item that normally can last up to 3000-4000 hours 

with proper usage. To keep the lamp life as long as possible, you can do the following 

settings via the OSD menu.

•  Setting the Lamp Mode

Setting the projector in 

Economic

SmartEco

 or 

LampSave 

mode extends the lamp 

operation life. To set 

Economic

SmartEco

 or 

LampSave

 mode, go into the 

SYSTEM 

SETUP: Advanced

 > 

Lamp Settings

 > 

Lamp Mode

 menu and press  / .

•  Setting Auto Power Off

This function allows the projector to turn off automatically if no input signal is detected 

after a set period of time to prevent unnecessary waste of lamp life.
To set 

Auto Power Off

, go into the 

SYSTEM SETUP: Basic

 > 

Operation Settings

 

Auto Power Off

 menu and press  / . If the preset time lengths are not suitable for 

your presentation, select 

Disable

. The projector will not automatically shut down in a 

certain time period.

Lamp mode

Description

Normal

Provides full lamp brightness

Economic

Lowers brightness to extend the lamp life and decreases the fan 
noise

SmartEco

Adjusts the lamp power automatically depending on the content 
brightness level

LampSave

Adjusts the lamp power automatically and lowers the brightness to 
extend the lamp life

Summary of Contents for MX507P


























































Reviews: