![background image](http://html1.mh-extra.com/html/benq/mx507p/mx507p_user-manual_2734817015.webp)
Connection
15
Connection
When connecting a signal source to the projector, be sure to:
1.
Turn all equipment off before making any connections.
2.
Use the correct signal cables for each source.
3.
Ensure the cables are firmly inserted.
•
In the connections shown below, some cables may not be included with the projector (see
). They are commercially available from electronics stores.
•
The connection illustrations below are for reference only. The rear connecting jacks available on the
projector vary with each projector model.
•
Many notebooks do not turn on their external ports when connected to a projector. Usually a key combo
like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or
a function key with a monitor symbol on the notebook. Press FN and the labeled function key
simultaneously. Refer to your notebook's documentation to find your notebook's key combination.
•
The D-Sub output only works when an appropriate D-Sub input is made to the
COMPUTER 1
jack.
•
If you wish to use this connection method when the projector is in standby mode, make sure the
Monitor Out
function is turned on in the
SYSTEM SETUP: Advanced
menu. See
for details.
1.
VGA cable
2.
VGA to DVI-A cable
3.
USB cable
4.
Audio cable
4
4
1
2
1
3
Notebook or desktop
computer
Speakers
Monitor
(DVI)
(VGA)
or