Operation
23
projector to correct keystoning at the right side of the image. Press
on the
projector to correct keystoning at the left side of the image.
Adjusting Corner Fit
Manually adjust four corners of the image by setting the horizontal and vertical values.
1.
Press
MENU/EXIT
and then press / until the
DISPLAY
menu is highlighted.
2.
Press
to
highlight
Corner Fit
and press
MODE/ENTER
. The
Corner Fit
correction
page displays.
3.
Press /
/
/
to select one corner and
press
MODE/ENTER
.
4.
Press /
to adjust vertical values.
5.
Press / to adjust horizontal values.
Corner Fit and 2D Keystone Adjustment Notice
The corner fit function is closely related to the 2D keystone function as both make
adjustments to correct picture distortion. Therefore, when correcting picture distortion,
both corner fit and 2D keystone functions should be used in conjunction to achieve the
best picture shape.
To achieve the best picture shape:
• When installing the projector, align the projector to the screen so they are as
perpendicular to each other as possible in order to minimize picture distortion.
• When making corner fit adjustments, if the desired effect cannot be achieved, adjust
the 2D keystone value and try again.
• When making 2D keystone adjustments, if the desired effect cannot be achieved, adjust
the corner fit value and try again.
Corner Fit
Enter
Back
Corner Fit
Reset
Back
