Positioning your projector
15
• Corner
fit
correction
• Surface
fit
correction
Set up your screen via the
QUICK INSTALL
hotkey on the remote control. You can
also go to the
SYSTEM SETUP: Basic
>
Projector Installation
menu after turning on
the projector. See
"Using the menus" on page 25
on how to use the OSD menu.
Your room layout or personal preference will dictate which installation location you select.
Take into consideration the size and position of your screen, the location of a suitable
power outlet, as well as the location and distance between the projector and the rest of
your equipment.
Obtaining a preferred projected image size
Projection dimensions
• Installation
distance
D
is measured from the projector rear side to the wall surface, which is also indicated
on the scale of the wall mount.
• Projection
distance
a
is measured from the projector rear side to the projection surface.
• Vertical
offset
V
is measured from the bottom edge of the wall plate to the top edge of screen.
a
D
V
M
W
F
h
X
Center
Thickness of the screen
Scale value = D
Center
30 mm
Plate height 260 mm
With cover 270 mm
Ceiling height (H)
=30mm+ Plate
V+h+F
