![background image](http://html1.mh-extra.com/html/benq/mw712/mw712_user-manual_2734768054.webp)
Operation
54
FUNCTION
DESCRIPTION
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
"Selecting a
picture mode" on page 34
for details.
Reference
Mode
Selects a picture mode that best suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See
"Setting the User 1/User 2 mode" on page 34
for details.
This function is only available when User 1 or User 2 is selected.
Brightness
Adjusts the brightness of the image. See
"Adjusting Brightness" on
page 35
for details.
This function is only available when User 1 or User 2 is selected.
Contrast
Adjusts the degree of difference between dark and light in the image.
See
"Adjusting Contrast" on page 35
for details.
This function is only available when User 1 or User 2 is selected.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See
"Adjusting Color" on page 35
for details.
This function is only available when User 1 or User 2 is selected.
This function is only available when a Video or S-Video signal is
selected and the system format is NTSC or PAL.
Tint
Adjusts the red and green color tones of the image. See
"Adjusting
Tint" on page 35
for details.
This function is only available when User 1 or User 2 is selected.
This function is only available when a Video or S-Video signal is
selected and the system format is NTSC or PAL.
Sharpness
Adjusts the image to make it look sharper or softer. See
"Adjusting
Sharpness" on page 35
for details.
This function is only available when User 1 or User 2 is selected.
2. PICTURE men
u