![background image](http://html1.mh-extra.com/html/benq/mw712/mw712_user-manual_2734768035.webp)
Operation
35
Using Wall Color
In the situation where you are projecting onto a colored surface such as a painted wall
which may not be white, the
Wall Color
feature can help correct the projected picture’s
color to prevent possible color difference between the source and projected pictures.
To use this function, go to the
DISPLAY
>
Wall Color
menu and press
/
to select
a color which is the closest to the color of the projection surface. There are several
precalibrated colors to choose from:
Light Yellow
,
Pink
,
Light Green
,
Blue
, and
Blackboard
.
Fine-tuning the image quality in user modes
According to the detected signal type, there are some user-definable functions available
when
User 1
or
User 2
mode is selected. Based on your needs, you can make
adjustments tothese functions by highlighting them and pressing
/
on the projector
or remote control
Adjusting Brightness
The higher the value, the brighter the image. And the
lower the setting, the darker the image. Adjust this
control so the black areas of the image appear just as
black and that detail in the dark areas is visible.
Adjusting Contrast
The higher the value, the greater the contrast. Use this
to set the peak white level after you have previously
adjusted the
Brightness
setting to suit your selected
input and viewing environment.
Adjusting Color
Lower setting produces less saturated colors. If the setting is too high, colors on the image
will be overpowering, which makes the image unrealistic.
Adjusting Tint
The higher the value, the more reddish the picture becomes. The lower the value, the
more greenish the picture becomes.
Adjusting Sharpness
The higher the value, the sharper the picture becomes. The lower the value, the softer the
picture becomes.
Adjusting Brilliant Color
This feature utilizes a new color-processing algorithm and system level enhancements to
enable higher brightness while providing truer, more vibrant colors in picture. It enables a
greater than 50% brightness increase in mid-tone images, which are common in video and
natural scenes, so the projector reproduces images in realistic and true colors. If you
prefer images with that quality, select
On
. If you don’t need it, select
Off
.
On
is the default and recommended selection for this projector. When
Off
is selected, the
Color Temperature
function is not available.
+50
+30
+70
0
+30
-30