![background image](http://html1.mh-extra.com/html/benq/mw712/mw712_user-manual_2734768042.webp)
Operation
42
Select the lamp saver mode
• Using the remote control.
Press
Smart Eco
and Highlight
Lamp Mode
and press
/
to select
Normal/
Economic/Smart Eco
.
• Using the OSD menu.
1.
Press
MENU/EXIT
and then press
/
until the
SYSTEM SETUP: Advanced
menu
is highlighted.
2.
Press
to
highlight
Lamp Mode
and press
MODE/ENTER
. The Lamp Settings page
displays.
3.
Highlight
Lamp Mode
and press
/
to
select
Normal/Economic/Smart Eco
.
The lamp brightness vary from the
different lamp mode,see the description list in table below.
•
If the Economic mode is selected, the light output will be reduced and result in darker
projected pictures.
Use build-in test pattern
You can adjust the image shape and focus status by observing
the input signal content, or using the test pattern build-in
OSD manual from OSD for better observe the shape
changed.
Open the OSD menu and go to the
SYSTEM SETUP:
Advanced
>
Test Pattern
>
On
. Press
MODE/ENTER
.
The
Test Pattern
displays.
Lamp Mode
Description
Normal
100% lamp brightness
.
Economic
80% lamp power consumption.
Smart Eco
This is default setting. Lamp power consumption will save from 30% to
100% dynamically by detecting the content brightness level.