![background image](http://html1.mh-extra.com/html/benq/mw712/mw712_user-manual_2734768044.webp)
Operation
44
Controlling the projector through a LAN
environment
Network Settings
allow you to manage the projector from a computer using a web
browser when the computer and the projector are properly connected to the same local
area network.
Configuring the Wired LAN Settings
If you are in a DHCP environment:
1.
Take a RJ45 cable and connect one end to the LAN input jack of the projector and
the other end to the RJ45 port.
2.
Press
MENU/EXIT
and then press
/
until the
SYSTEM SETUP:
Advanced
menu is highlighted.
3.
Press
to highlight
Network Settings
and press
MODE/ENTER
. The
Network Settings
page displays.
4.
Press
to highlight
Wired LAN
and press
MODE/ENTER
.
5.
Press
to highlight
DHCP
and press
/
to select
On
.
6.
Press
to highlight
Apply
and press
MODE/ENTER
.
7.
Re-enter the
Wired LAN
page. The
IP Address
,
Subnet Mask
,
Default
Gateway
, and
DNS Server
settings will be displayed. Note down the IP address.
If the IP Address still does not display, contact your ITS administrator.
If you are in a non-DHCP environment:
1.
Repeat steps 1-4 above.
2.
Press
to
highlight
DHCP
and press
/
to select
Off
.
3.
Contact your ITS administrator for information on the
IP Address
,
Subnet Mask
,
Default Gateway
, and
DNS Server
settings.
4.
Press
to select the item you want to modify and enter the value.
5.
Press
to highlight Apply and press
MODE/ENTER
.
Controlling the projector remotely through a web
browser
Once you have configured the LAN settings, you can find the IP address for the projector
in the bottom of the network screen. You can use any computer that is on the same local
area network to control the projector.
Internet
IR Router