![background image](http://html1.mh-extra.com/html/benq/ms550p/ms550p_user-manual_2734735031.webp)
31
Menu operation
Auto Signal
Adjustment
•
On
: Allows the projector to automatically determines the best picture timings for
the displayed image when PC signal (analog RGB) is selected and
AUTO
is
pressed.
•
Off
: The projector will not respond when
AUTO
is pressed.
Light Settings
•
Light Mode
Setting the Light Mode on page 35
.
•
Reset Light Timer
Resetting the Light Timer on page 38
.
•
Light Usage Time
: Displays the number of hours the lamp has been used.
Operation
Settings
Quick Cooling
:
Selecting
On
enables the function and projector cooling time will be shortened
from a normal 90-second duration to approximately 15 seconds.
Blank Timer
Sets the image blank time when there is no action taken on the blank screen, once
elapsed the image will return to the screen. If the preset time spans are not suitable
for your need, select
Disable
. No matter
Blank Timer
is activated or not, you
can press most of the keys on the projector or remote control to restore the
picture.
Reminder Message
Sets the reminder messages on or off.
High Altitude Mode
We recommend you use the
High Altitude Mode
when your environment is
between 1500 m –3000 m above sea level, and ambient temperature is between
0°C–30°C.
Operation under "
High Altitude Mode
" may cause a higher decibel operating
noise level because of increased fan speed necessary to improve overall system
cooling and performance.
If you use this projector under other extreme conditions excluding the above, it
may display auto shut-down symptoms, which is designed to protect your projector
from over-heating. In cases like this, you should switch to High Altitude mode to
solve these symptoms. However, this is not to state that this projector can operate
under any and all harsh or extreme conditions.
Do not use the
High Altitude Mode
if your altitude is between 0 m and 1500 m and ambient
temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on
under such a condition.
Power On/Off Settings
•
Direct Power On
: Allows the projector to turn on automatically once the
power is fed through the power cord.
•
Signal Power On
: Sets whether to turn the projector directly on without
pressing
POWER
or
ON
when the projector is in standby mode and
detects a VGA signal with 5V power.
•
Auto Power Off
: Allows the projector to turn off automatically if no input signal
is detected after a set period of time to prevent unnecessary waste of lamp life.
•
Power Off Timer
: Sets the auto-shutdown timer.