background image

22 Operation 

 

Securing the projector

Using a security cable lock

The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a lock, such as 
the Kensington lock, to secure the projector. You can locate a Kensington lock slot on the rear side of 
the projector. See item 16 on 

page 8

.

A Kensington security cable lock is usually a combination of key(s) and the lock. Refer to the lock’s 
documentation for finding out how to use it.

Utilizing the password function

Setting a password

1.  Go to 

Advanced Menu - Settings

 > 

Security Settings

. Press 

OK

. The 

Security Settings

 

page appears.

2.  Highlight 

Change Password

 and press 

OK

.

3.  The four arrow keys ( , 

,

 

) respectively represent 

4 digits (1, 2, 3, 4). According to the password you desire 
to set, press the arrow keys to enter six digits for the 
password.

4.  Confirm the new password by re-entering the new 

password.
Once the password is set, the OSD menu returns to the 

Security Settings

 page.

5.  To activate the 

Power On Lock

 function, press  /  to 

highlight 

Power On Lock

 and press  /  to select 

On

. Input the password again.

If you forget the password

If you enter the wrong password, the password error 
message will appear, and the 

Input Password

 message 

follows. If you absolutely do not remember the password, 
you can use the password recall procedure. See 

Entering the 

password recall procedure on page 22

.

If you enter an incorrect password 5 times in succession, the 
projector will automatically shut down in a short time.

Entering the password recall procedure

1.  Press and hold 

AUTO

 for 3 seconds. The projector will 

display a coded number on the screen.

2.  Write down the number and turn off your projector.
3.  Seek help from the local BenQ service center to decode 

the number. You may be required to provide proof of 
purchase documentation to verify that you are an 
authorized user of the projector.

• The digits being input will display as asterisks on-screen. Make a note of your selected password and keep it in a 

safe place in advance or right after the password is entered so that it is available to you should you ever forget it.

• Once a password has been set and the power on lock is activated, the projector cannot be used unless the 

correct password is entered every time the projector is started.

Input New Password

Return

Password Error

Please try again.

Please write down the recall code, and contact 
BenQ Customer Center.

Recall Code:

Recall Password

Return

Summary of Contents for MS550P













































Reviews: