Operation
52
English
Note that the menu items are available when the projector detects at least one valid signal. If
there is no equipment connected to the projector or no signal detected, limited menu items
are accessible.
The default values listed in this manual, especially on page
50
-
57
, are for reference only.
They may vary from the projectors due to the continuous improvement to the products.
5.
SYSTEM
SETUP:
Advanced
Quick Cooling
O
ff/
On
High Altitude Mode
Off
/
On
Audio Settings
Mute
Volume
Power on/off
ring tone
Off
/On
Range : 0 ~ 10
O
ff/
On
Lamp Settings
Lamp Mode
Normal
/
Economic
Reset lamp timer
Equivalent Lamp Hour
Security
Settings
Change password
Power on Lock
Off
/
On
Baud Rate
9600/19200/38400/57600/
115200
Test Pattern
Off
/
On
Closed Caption
Closed Caption
Enable
Off
/
On
Caption Version
CC1
/CC2/CC3/CC4
Stabdby Monitor
Out
Off
/
On
Lan Control
Settings
Control by
RS232
/RJ45
Network Status
Network Status
DHCP
Projection IP Address
Subnet Mask
Default Gateway
DNS
Apply
Reset All Settings
